The Way to Improve Your Antenna for Better TV Reception


You might be too much from one or more TV channel transmitters, which prevents signal reception. If you’re too much, then you are going to go through the digital horizon, which can be an abrupt TV sign drop-off. This really is a by-product of this analog-to-digital TV broadcasting transition.

TV signs are now transmitted digitally (1s and 0s), and there is no slow fading as space increases. You get high quality all the time, intermittently, or not all. As you approach the electronic cliff, the picture may seem blocky, or it might cut out and return.


TV signals are influenced by physical barriers, such as trees and hills. Some substances used in house building, including stucco, concrete, aluminum siding, metal roofs, foil-lined ducts and conduits, and solar panels restrict the potency of indoor or attic-placed antennas.

Weather (for example, rain and wind ), interference from particular kinds of antene satelit tv cu lnb equipment, and LTE mobile towers occasionally temporarily cut a TV signal.

At quite long distances, the planet’s curvature can impact TV signal reception.


You may have many channel transmitters in the regional area, but these transmitters might not be at precisely the exact same site. 1 station might transmit in the northwest, another in the west, and yet another in the east.

In case you’ve got a vertical antenna, it might not receive signals from multiple transmitter locations. In case you’ve got a multi-directional or omnidirectional antenna, then disturbance is more probable.


If more than 1 TV is connected to the identical antenna by means of a splitter, then the sign loses strength. If three or even four TVs are attached to an antenna, one or two may seem nice, and the remainder might just receive signals intermittently or not at all. You can create a home made cliff impact.

Measures to Improve TV Antenna Reception

Being aware of the causes of antenna reception troubles, it is possible to utilize one or more of these choices to boost your TV signal.

Remove obstacles. Eliminate obstacles, if at all possible. Ensure that your antenna has a definite shot at the direction of this TV channel transmitter.

Check and replace antenna links. Make sure the antenna and TV connections are safe. Assess for brittleness and fraying.

In case you have an external antenna, wires can be worn if exposed to the components. Indoor antennas could be chewed by pets.

Be certain that the antenna connection terminals are not rusted, and inspect the whole length of this cable, if at all possible, for cuts or breaks. You might be unable to confirm the section of the cable which runs through a wall socket.

If the cable has been left from the analog TV age, it might be 20 AWG (American Wire Gauge) RG59. Think about replacing it with a milder 18 AWG RG6 cable. RG6 does a much better job using digital TV signals, since it supports wider bandwidth, long distance runs, and holds up far better outside.

Prices of wires vary based on length and brand. Prices begin at a few bucks to get a three-foot or lump-sum duration.

Run a station scan. After assessing the antenna positioning and links, go in the TV or DTV converter box installation menu, then conduct a brand new channel scanning . New stations might be added which were not available previously. If a channel registers, you need to have the ability to watch it.

Use a Cable . In case you’ve got an outside antenna and get TV signals from several instructions , including a rotor into the antenna may help. But this solution is costly, with costs for an entire kit that range from approximately $100 to $200 or more.